Product Details:

Suspended Permanent Magnetic Overband Separators are designed to eliminate tramp metal from the product carried by belt, vibratory feeders or inclined planes.Over bands are mainly used to protect Machine such as Crushers, Shredders and others, to remove ferrous particles and purify products ( Industries like Foundries, Coal Mines, Cement Works, Food, Sponge Iron, Char coal, Glass, Chemical Industries and Domestic waste recycling Plants.)The permanent Magnetic Overband Separators are used when an automatic Removal of ferrous contamination is necessary. If not, fixed Permanent Suspension Magnets are more suitable.

Applications:

• Five type of Separators Re designed to operate at a predetermined working gap over the conveyor : 100, 150, 200, 250 and 300mm.

• Idler and drive drums will be rolled steel construction fitted with high tensiled steel shafts and mounted in self lubricated dust sealed plumber blocks. Adjuster screws would be fitted to provide tensioning take up on idler drums.

Installation:

These units can be installed either inline over the terminal head pulley (Image-1), or transversal to the conveyor (Image-2). In both cases, it is necessary to foresee Non- Magnetic products under the Magnetic Field. The most effective position is inline over the head pulley. The material being conveyed is in virtual Suspension and Tramp Iron is therefore more readily extracted. Very good results are obtained by combining a Permanent Magnetic Overband with Permanent Magnetic Pulley at discharge end.

Construction:

2 “U” Section pieces are fitted on the magnet by fastening ears and are supporting bearings of drums and the drumd are enuipped with shafts mounted on removable hubs. All the bearings are equipped with stakes for tightening the belt. reduction gear coupled Electric Motor/Geared Motors by vee belts drives the belt.

Magnet Unit:

This Magnet is developed from high Intensity Stroncium Ferrite Rare Earth Magnets and guaranteed to give full magnetic power in the entire life span of installation. One Non Magnetic Stainless Steel Plate is supplied to cover the poles of the magnet. No need for electrical supply or maintenance.

Working Principle: